Local Service in Wandsworth Common 

1.      What are the tripping issues with solar?

Tripping issues with solar inverters can occur due to various factors, including environmental conditions, electrical faults, and system design issues. Here are some common tripping issues specific to solar inverters:

Overvoltage:

Scenario: When the voltage generated by the solar panels exceeds the inverter’s maximum input voltage rating, often due to high solar irradiance or low load conditions.

Effect: The inverter trips to protect its internal components from damage due to excessive voltage.

Undervoltage:

Scenario: Occurs when the voltage from the solar panels falls below the inverter’s minimum input voltage, which can happen during low light conditions or shading.

Effect: The inverter trips to avoid unstable operation and potential damage.

Overcurrent:

Scenario: Excessive current flow, which can result from a short circuit in the wiring or a fault within the solar panels.

Effect: The inverter trips to prevent damage to the internal circuitry and connected components.

Overtemperature:

Scenario: Solar inverters can overheat due to high ambient temperatures, inadequate ventilation, or excessive power generation.

Effect: The inverter shuts down to prevent thermal damage.

Ground Fault:

Scenario: A ground fault occurs when there is an unintended electrical connection between the system and the ground.

Effect: The inverter trips to prevent potential electric shock and equipment damage.

Grid Faults:

Scenario: Issues such as grid overvoltage, undervoltage, frequency deviations, or grid outages.

Effect: The inverter disconnects from the grid to prevent islanding and ensure compliance with grid regulations.

DC Component in AC Output:

Scenario: Presence of a significant DC component in the AC output, which can occur due to faults in the inverter.

Effect: The inverter trips to ensure the quality of the AC power and protect connected loads.

Isolation Fault:

Scenario: Occurs when there is a breakdown in the insulation between the AC and DC sides of the inverter or within the solar panels.

Effect: The inverter trips to prevent electric shocks and potential damage to the system.

Anti-Islanding Protection:

Scenario: In grid-tied systems, if the grid power fails and the inverter continues to supply power to a section of the grid.

Effect: The inverter trips to avoid islanding, which is crucial for the safety of utility workers and the proper operation of the grid.

Component Failure:

Scenario: Failures within the inverter such as faulty capacitors, transistors, or other key components.

2.      Can tripping issues happen underground?

Yes, tripping issues can occur in underground electrical systems, including those involving inverters and other components. These issues are often related to environmental conditions, electrical faults, and physical damage unique to underground installations. Here are some common tripping issues specific to underground systems:

Moisture and Water Ingress:

Scenario: Water infiltration into underground enclosures, conduits, or junction boxes can cause short circuits and ground faults.

Effect: Inverters and other protective devices trip to prevent electrical hazards and damage.

Cable Insulation Damage:

Scenario: Physical damage to underground cables, often caused by digging, rodent activity, or aging, can lead to insulation failure and short circuits.

Effect: Overcurrent and ground fault protection devices trip to isolate the fault and prevent further damage.

Ground Faults:

Scenario: Undetected faults in underground cables can lead to unintended connections between the electrical system and the ground.

Effect: Ground fault protection mechanisms trip to prevent shock hazards and equipment damage.

Environmental Factors:

Scenario: Underground systems are exposed to fluctuating temperatures, soil movement, and chemical exposure, which can degrade insulation and connectors.

Effect: Tripping can occur due to overtemperature protection, insulation resistance monitoring, or environmental sensing.

Corrosion:

Scenario: Corrosive substances in the soil can deteriorate metal components, leading to increased resistance, heat buildup, and potential short circuits.

Effect: Inverters and circuit breakers trip to prevent overheating and electrical fires.

Vermin and Pests:

Scenario: Rodents or insects can damage cables and connectors, causing short circuits or open circuits.

Effect: Electrical protection devices trip to isolate the affected sections and prevent damage.

Soil Movement and Settling:

Scenario: Shifts in the soil due to natural settling or seismic activity can stress underground cables and connectors.

Effect: Mechanical damage can lead to short circuits, causing overcurrent protection devices to trip.

Voltage Fluctuations:

Scenario: Voltage variations can occur due to long cable runs and varying load conditions in underground systems.

Effect: Inverters may trip on detecting undervoltage or overvoltage conditions to protect the system.

Inadequate Ventilation:

Scenario: Poor ventilation in underground enclosures can lead to overheating of electrical components.

Effect: Overtemperature protection in inverters and other devices trips to prevent thermal damage.

Electromagnetic Interference (EMI):

Scenario: Underground cables can be affected by electromagnetic interference from nearby power lines or other sources.

Effect: Inverters and sensitive equipment may trip to prevent malfunction or damage due to EMI.

3.      What is meant by tripping issues?

Tripping issues refer to situations where protective devices within electrical systems, such as inverters, circuit breakers, or fuses, automatically disconnect or shut down the system in response to abnormal or potentially dangerous conditions. These conditions can range from electrical faults to environmental factors. The purpose of tripping is to protect the system, connected devices, and users from damage, malfunction, or hazardous situations.

Here’s a more detailed explanation of what tripping issues entail:

Types of Tripping Issues:

Electrical Faults:

Overvoltage: When the voltage exceeds safe levels, the system trips to prevent damage.

Undervoltage: When the voltage drops below operational thresholds, the system shuts down to avoid instability.

Overcurrent: Excessive current flow, potentially due to a short circuit, causes the system to trip.

Ground Fault: Unintended connection between the electrical system and the ground prompts a shutdown.

Frequency Deviations: Significant deviations from the standard frequency (e.g., 50 Hz or 60 Hz) cause the system to trip to maintain stable operation.

Thermal Conditions:

Overtemperature: Excessive heat buildup triggers the system to shut down to prevent overheating and fire risks.

Component Failures:

Internal Faults: Failures within key components, like capacitors or transistors, lead to tripping to prevent further damage.

Environmental Factors:

Moisture: Water ingress can cause short circuits, prompting a trip.

Dust and Debris: Accumulation of dust can cause overheating or short circuits.

Corrosion: Corrosive environments can degrade components, leading to electrical faults and tripping.

System Design and Operational Issues:

Anti-Islanding: In grid-tied systems, if the grid fails, the inverter trips to prevent isolated operation.

Isolation Faults: Issues with insulation or isolation between different parts of the system can cause tripping.

Communication Failures: Loss of communication between the inverter and monitoring systems can prompt a shutdown.

Purpose of Tripping Issues:

Safety: Protects users from electric shock, fire, and other hazards.

Equipment Protection: Prevents damage to the inverter and other connected devices by shutting down under unsafe conditions.

System Reliability: Ensures the stability and reliability of the electrical system by preventing operation under fault conditions.

Compliance: Ensures adherence to safety and operational standards.

Examples in Practice:

In a Solar System: If the solar panels produce too high a voltage due to bright sunlight, the inverter may trip to protect itself and the connected grid.

In an Underground Installation: Moisture ingress causing a short circuit in underground cables will lead to tripping to prevent electrical hazards.

In Residential Wiring: A circuit breaker trips if a short circuit occurs, preventing overheating and potential fires.